Set up the Printer
Set the printer type and configure print settings.
Set the Printer Type
You must select the correct type of printer for the output
to be correct.
•
Full size letter/A4 printers must be compatible with
PCL5 or greater.
•
Label printers must be compatible with Zebra ZPL II
and support at least 3 in x 2 in or 2 in x 3 in label
size.
To set the printer type:
1.
From the Setup menu, push the Printer Settings
softkey.
2.
Push or until Printer is highlighted.
3.
Push .
4.
Push or to highlight Letter/A4 (PCL5) or Label
(ZPL II).
5.
Push .
Set the Print Header
Use the print header to print a company name or other
standard information at the top of each printout. Print
headers on label printers are limited to 26 characters.
Enter a print header.
1.
From the Setup menu, push the Printer Settings
softkey.
2.
Push or until Print Header Line 1 or Print
Header Line 2 is highlighted.
3.
From the keyboard screen, for each character in the
header:
a. Push , , , or to move the highlight to a
character.
b. Push .
4.
Push the Done softkey.
Electrical Safety Analyzer
Set Up the Product
21