Preventing Accidental Erasure - Image Protection - Sony Handycam DCR-TRV240 Operating Instructions Manual

Preventing accidental erasure
– Image protection
– Except DCR-TRV240
You can protect selected images, to prevent accidental erasure of important images.
Before operation
Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the left (unlock) position.
(2) Play back the image you want to protect.
(3) Press MENU to display the menu settings.
(4) Turn the SEL/PUSH EXEC dial to select PROTECT in
(5) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(6) Press MENU to make the menu settings disappear. The - mark is displayed
beside the data file name of the protected image.
3,6
To cancel image protection
Select OFF in step 5, then press the SEL/PUSH EXEC dial.
Note
Formatting erases all information on the "Memory Stick", including the protected
image data. Before formatting a "Memory Stick", check its contents.
If the write-protect tab on the "Memory Stick" is set to LOCK
You cannot protect images.
170
MENU
4
MEMORY SET 21/40
STILL SET
MOVIE SET
PRINT MARK
PROTECT OFF
SLIDE SHOW
FILE NO.
DELETE ALL
FORMAT
RETURN
[ MENU ] : END
5
MEMORY SET 21/40
STILL SET
MOVIE SET
PRINT MARK
PROTECT ON
SLIDE SHOW OFF
FILE NO.
DELETE ALL
FORMAT
RETURN
[ MENU ] : END
, then press the dial.
MEMORY SET 21/40
STILL SET
MOVIE SET
PRINT MARK
PROTECT ON
SLIDE SHOW OFF
FILE NO.
DELETE ALL
FORMAT
RETURN
[ MENU ] : END
MEMORY SET 21/40
STILL SET
MOVIE SET
PRINT MARK
ON
PROTECT
SLIDE SHOW
FILE NO.
DELETE ALL
FORMAT
RETURN
[ MENU ] : END