Sony Handycam DCR-TRV240 Operating Instructions Manual page 108

Changing the menu settings
Icon/item
HiFi SOUND
TBC*
TBC stands for "Time Base Corrector".
DNR*
DNR stands for "Digital Noise Reduction".
AUDIO MIX
A/V t DV OUT
PB MODE
* When you play back tapes recorded in the Hi8/standard 8 system only
Notes on AUDIO MIX
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
•You can adjust the balance only for tapes recorded in the Digital8
Note on PB MODE
The mode will return to the default setting when:
– you remove the battery pack or power source.
– you turn the POWER switch.
108
Mode Meaning
z STEREO To play back a stereo tape or dual sound track
tape with main and sub sound (p. 188)
1 To play back a stereo tape with the left sound or
a dual sound track tape with main sound
2 To play back a stereo tape with the right sound
or a dual sound track tape with sub sound
z ON To correct jitter
OFF To not correct jitter. Set TBC to OFF when
playing back a tape on which you have dubbed
over and recorded the signal of a TV game or
similar machine.
z ON To reduce picture noise
OFF To reduce a conspicuous afterimage when the
picture has a lot of movement
— To adjust the balance between the stereo 1 and
stereo 2
z OFF To output digital images and sound in analog
format using your camcorder
ON To output analog images and sound in digital
format using your camcorder (p. 88)
z AUTO To automatically select the system (Hi8/
standard 8 or Digital8
record on the tape, and play back the tape
/ To play back a tape that was recorded in the
Hi8/standard 8 system when your camcorder
does not automatically distinguish the recording
system
ST1 ST2
) that was used to
POWER
switch
VCR
VCR
VCR
VCR
VCR
VCR
system.