Step 2 Setting The Date And Time - Sony Handycam DCR-TRV240 Operating Instructions Manual

Step 2 Setting the date and time

Set the date and time settings when you use your camcorder for the first time.
"CLOCK SET" will be displayed each time that you set the POWER switch to
CAMERA/MEMORY (except DCR-TRV240) unless you set the date and time settings.
If you do not use your camcorder for about half a year, the date and time settings may
be cleared from memory (bars may appear) because the built-in rechargeable battery
installed in your camcorder will have been discharged (p. 196).
Set the year, then the month, the day, the hour and then the minute.
(1) Set the POWER switch to CAMERA or MEMORY (except DCR-TRV240), and
(2) Turn the SEL/PUSH EXEC dial to select CLOCK SET in
(3) Turn the SEL/PUSH EXEC dial to adjust the desired year, then press the dial.
(4) Set the month, day and hour by turning the SEL/PUSH EXEC dial and
(5) Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by
(6) Press MENU to make the menu settings disappear.
18
then press MENU to display the menu settings.
dial.
pressing the dial.
the time signal. The clock starts to move.
1,6
MENU
2
SETUP MENU
– – : – – : – –
CLOCK SET
USB STREAM
USBCONNECT
LTR SIZE
LANGUAGE
DEMO MODE
RETURN
[ MENU ] : END
3
2002 JAN 1
12 00 AM
5
SETUP MENU
CLOCK SET
USB STREAM
USBCONNECT 2002 JUL
LTR SIZE
LANGUAGE
DEMO MODE
RETURN 5 30 PM
[ MENU ] : END
, then press the
SETUP MENU
CLOCK SET
USB STREAM
USBCONNECT 2002 JAN
LTR SIZE
LANGUAGE
DEMO MODE
RETURN 12 00 AM
[ MENU ] : END
2002 JAN 1
12 00 AM
SETUP MENU
CLOCK SET JUL 4 2002
5 : 30 : 00 PM
USB STREAM
4 USBCONNECT
LTR SIZE
LANGUAGE
DEMO MODE
RETURN
[ MENU ] : END
1