Recording Superimposed Images On A Tape - Sony Handycam DCR-TRV240 Operating Instructions Manual

Superimposing a still image in the "Memory Stick" on an image
– MEMORY MIX

Recording superimposed images on a tape

Before operation
•Insert a tape for recording into your camcorder.
•Insert a "Memory Stick" is recorded still images into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) In the standby mode, press MEMORY MIX.
(3) Press MEMORY+/– to select the still image you want to superimpose.
(4) Turn the SEL/PUSH EXEC dial to select the desired mode.
(5) Press the SEL/PUSH EXEC dial.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
(7) Press START/STOP to start recording.
2
MEMORY
MIX
M. CHROM
Still image
130
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image.
To see the previous image, press MEMORY –. To see the next image, press
MEMORY+.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM y M. OVERLAP
The still image is superimposed on the moving picture.
M. CHROM – The color (blue) scheme of the area in the still image which is
to be swapped with a moving picture
M. LUMI – The color (bright) scheme of the area in the still image which
is to be swapped with a moving picture
C. CHROM – The color (blue) scheme of the area in the moving picture
which is to be swapped with a still image
M. OVERLAP – No adjustment necessary
The fewer bars there are on the screen, the stronger the effect becomes.
100–0021
3
4
M. LUMI
100–0021
5
M. LUMI I I I • • • •
100–0021
6
M. LUMI I • • • • • •
100–0021