Step 3 Inserting A Cassette; Dcr-Trv240/Trv340 - Sony Handycam DCR-TRV240 Operating Instructions Manual

Step 3 Inserting a cassette

We recommend using Hi8
(1) Prepare the power source (p. 12).
(2) Slide OPEN/EJECT in the direction of the arrow and open the lid.
(3) Insert the cassette straight as far as possible into the cassette compartment with
(4) Close the cassette compartment by pressing
(5) After the cassette compartment going down completely, close the lid until it
2
To eject a cassette
Follow the procedure above, and take out the cassette in step 3.
Notes
•Do not press the cassette compartment down. Doing so may cause a malfunction.
•Your camcorder records pictures in the Digital8
• The recording time when you use your camcorder is half of indicated time on Hi8
•If you use standard 8
pattern noise may appear when you play back standard 8
(including other DCR-TRV240/TRV340/TRV740/TRV840).
•The cassette compartment may not be closed when you press any part of the lid other
than the
To prevent accidental erasure
Slide the write-protect tab on the cassette to expose the red mark.
20
The cassette compartment automatically lifts up and opens.
the window facing up.
Push the center of the cassette back to insert.
The cassette compartment automatically goes down.
clicks.
3
tape. If you select the LP mode in the menu settings, 3/4 of indicated time on Hi8
tape.
mark.
/Digital8 video cassettes.
tape, be sure to play back the tape on your camcorder. Mosaic
on the cassette compartment.
4,5
5
system.
tape on other camcorders
4