Using "Memory Stick"– Introduction
Selecting the still image quality mode
You can select the image quality mode in still image recording. The default setting is
SUPER FINE (DCR-TRV740/TRV840), or FINE (DCR-TRV340).
(1) Set the POWER switch to VCR or MEMORY. Make sure that the LOCK switch
is set to the left (unlock) position.
(2) Press MENU to display the menu settings.
(3) Turn the SEL/PUSH EXEC dial to select STILL SET in
(4) Turn the SEL/PUSH EXEC dial to select QUALITY, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select the desired image quality, then press
the dial.
1
2
MENU
Note
In some cases, changing the image quality mode may not affect the image quality,
depending on the type of images you are shooting.
, then press the dial.
3
MEMORY SET
STILL SET
BURST
OFF
QUALITY
IMAGESIZE
RETURN
[ MENU ] : END
4
MEMORY SET
STILL SET
BURST
QUALITY
SUPER FINE
IMAGESIZE
FINE
RETURN
STANDARD
REMAIN
[ MENU ] : END
5
MEMORY SET
STILL SET
BURST
QUALITY
STANDARD
IMAGESIZE
RETURN
REMAIN
[ MENU ] : END
40
60
119