Focusing Manually - Sony DCR-TRV19 Manual de instrucciones / Manual de instruções Operating Instructions Manual

Focusing manually

You can gain better results by manually adjusting the focus in the following cases.
Normally, focus is automatically adjusted.
•The autofocus mode is not effective when shooting:
– Subjects through glass coated with water droplets
– Horizontal stripes
– Subjects with little contrast with backgrounds such as walls or the sky
•Shooting a stationary subject when using a tripod
•When you want to change the focus from a subject in the foreground to a subject in
the background
The POWER switch should be set to
TRV33 only).
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press FOCUS.
(3) Press MANUAL. The screen to adjust the focus appears.
(4) Press
(5) Press
To return to FN
Press EXIT.
To return to the autofocus
On the FOCUS screen, press
To focus precisely
It is easier to focus on the subject if you adjust the zoom to shoot at the "W" (wide-
angle) position after focusing at the "T" (telephoto) position.
When you shoot close to the subject
Focus at the end of the "W" (wide-angle) position.
9 changes as follows:
66
T or t
OK to return to PAGE1.
2
FOCUS
when recording a distant subject
when the subject is too close to focus on
to sharpen focus.
AUTO
MANU–
AL
AUTO to return to PAGE1.
or (DCR-TRV22/
4
OK AUTO
MANU–
AL
OK