Sony DCR-TRV19 Manual de instrucciones / Manual de instruções Operating Instructions Manual page 60

Using special effects – Digital effect (DCR-TRV22/TRV33 only)
The POWER switch should be set to
Operate by touching the panel.
(1) Press FN and select PAGE2.
(2) Press DIG EFFT. The screen to select a digital effect is displayed.
(3) Press a desired mode. When you select STILL or LUMI., the still image is
(4) Press – (to decrease the effect)/+ (to increase the effect) to adjust the effect.
Items to adjust
STILL
FLASH
LUMI.
TRAIL
SLOW SHTR
OLD MOVIE
(5) Press
To return to FN
Press EXIT.
To cancel digital effect
Press
60
stored in memory.
The rate of the still image you want to superimpose on the moving
picture
The interval of flash motion
The color scheme of the area in the still image which is to be swapped
with a moving picture
The vanishing time of the incidental image
Shutter speed. The larger the shutter speed number, the slower the
shutter speed.
No adjustment is necessary.
OK to return to PAGE2.
2
DIG DIG EFFT
EFFT
OFF on the DIG EFFT screen to return to PAGE2.
OFF OK
SLOW OLD
SHTR MOVIE
STILL
FLASH LUMI. TRAIL
[a] The bar appears when setting following digital
effect modes: STILL, FLASH, LUMI., TRAIL.
.
4
DIG EFFT
OFF OK
LUMI.
[a]