Using The Viewfinder - Sony DCR-TRV19 Manual de instrucciones / Manual de instruções Operating Instructions Manual

Using the viewfinder

You can operate camera brightness and fader on the touch panel when looking at the
viewfinder. Turn the LCD panel over and move it back to your camcorder body with
the LCD screen facing out to do this operation.
The POWER switch should be set to
TRV33 only).
Operate by touching the panel.
(1) Turn the LCD panel over and move it back to your camcorder body with the
(2) Press
(3) Press OK. The LCD screen is turned off.
(4) Using the viewfinder, press the LCD screen. EXPOSURE,
(5) Press the LCD screen and select a desired item, then press
EXPOSURE: Adjust the exposure by pressing –/+.
FADER:
4
To make the buttons on the LCD screen disappear
Press
70
LCD screen facing out, then extend the viewfinder.
OFF. The PANEL OFF indicator appears on the screen.
FADER (only when the POWER switch is set to CAMERA) appear.
Press FADER until a desired fader mode appears.
The indicator changes as follows:
FADER
(no indicator) T DOT*
* DCR-TRV22/TRV33 only
ON: The LCD screen lights up.
When the POWER switch is set
to CAMERA
EXPO–
SURE
ON
When the POWER switch is set to
MEMORY (DCR-TRV22/TRV33
only)
EXPO–
SURE
ON
OK.
t M. FADER t BOUNCE t MONOTONE
T WIPE* T OVERLAP*
OK
FADER
OK
or (DCR-TRV22/
OK,
OK.
Viewfinder
ON and