Step 3 Using the touch panel
Your camcorder has operation buttons on the LCD screen.
Touch the LCD screen directly with your finger to operate each function.
(1) Set the POWER switch to CAMERA to record, VCR to play back, or MEMORY
to use the "Memory Stick" (DCR-TRV22/TRV33 only).
(2) Press OPEN to open the LCD panel.
(3) Press FN. Operation buttons on PAGE1 are displayed on the LCD screen.
(4) Press PAGE2/PAGE3 to display PAGE2/PAGE3. Operation buttons on
PAGE2/PAGE3 are displayed on the LCD screen.
(5) Press a desired operation item. See relevant pages of this manual for each
function.
3
When the POWER switch
is set to CAMERA
PAGE1 PAGE2
SPOT
FOCUS
MENU
To return to FN
Press EXIT.
To execute settings
Press
OK. The display returns to PAGE1/PAGE2/PAGE3.
To cancel settings
Press
OFF. The display returns to PAGE1/PAGE2/PAGE3.
To make screen indicators disappear
Press DSPL/BATT INFO.
EXIT
FOCUS
SPOT
METER
FADER
END
EXPO-
SCH
SURE
2
1
23