Labeling A Cassette On A Cassette With Cassette Memory - Sony DCR-TRV19 Manual de instrucciones / Manual de instruções Operating Instructions Manual

Labeling a cassette on a cassette with
Cassette Memory
The label can consist of up to 10 characters and is stored in Cassette Memory. When you
insert the labeled cassette and set the POWER switch to CAMERA or VCR, the label is
displayed for about 5 seconds.
The POWER switch should be set to
Operate by touching the panel.
(1) Insert the cassette with Cassette Memory you want to label.
(2) Press FN to display PAGE1.
(3) Press MENU to display the menu.
(4) Select TAPE TITLE in
(5) Select a desired character. Repeat pressing a key to select a desired character
on the key.
(6) Press c to move the cursor to select the next character. Repeat the same
procedure as steps 5 and 6 to complete the label.
(7) Press SET. The label is stored in memory.
4
TAPE TITLE
&? !
GH I
PQR
S
To return to FN
Press EXIT.
To erase the label you have made
Erase the label by selecting C in step 5, then press SET.
To change the label you have made
Insert the cassette to change the label, and operate in the same way to make a new label.
If you have superimposed titles in the cassette
When the label appears, up to 4 titles also appear.
To erase the character
Press C. The last character is erased.
To enter a space
Press c.
104
EXIT
[ _ _ _ _ _ _ _ _ _ _ ]
ABC DEF T t
JKL MNO 123 678
45 90
TUV WXY ' . , SET
Z –
/
, then press EXEC (p. 181).
5
TAPE TITLE EXIT
[ G _ _ _ _ _ _ _ _ _ ]
&? ! ABC DEF T t
GH I JKL MNO 123
45
PQR TUV WXY ' . ,
S Z –
/
or .
6
TAPE TITLE
[ GRADU _ _ _ _ _ ]
&? ! ABC
678 GH I JKL
90
SET PQR TUV
S
EXIT
DEF T t
MNO 123 678
45 90
WXY ' . , SET
Z –
/