Table of Contents
Advertisement
Configuration Setup
Configuration Method
The method for configuring the NAS e7000 v2 is to use the WebUI configuration
application that comes with the NAS e7000 v2.
WebUI Configuration
The NAS e7000 v2 includes a WebUI that is designed to be a graphical,
easy-to-use application that gathers the necessary information for configuration.
The WebUI may be accessed through two methods:
Auto Discovery Method (Via RapidLaunch)
The NAS e7000 v2 includes a RapidLaunch CD that can run on any
Windows-based PC using Internet Explorer 5.5 (or later).
Requirements
The following items are required to run the WebUI configuration application:
Note:
and mouse. These ports are available and supported by the NAS device, if used.
36
Through auto discovery mode using the RapidLaunch utility
By host name
Windows-based PC loaded with Internet Explorer 5.5 (or later) on the same
network segment as the NAS e7000 v2
RapidLaunch CD
The NAS e7000 v2 is designed to be deployed without a monitor, keyboard,
NAS e7000 v2 Quick Start Guide
Advertisement
Table of Contents
