Method 1: Remote Browser (Using Hostname); Procedure - HP ML110 G1 User Manual

• Remote Browser method (using hostname)
• Direct Attach method
NOTE:
You can configure this system through the WebUI or manually through
Remote Desktop or Windows Storage Server 2003 Desktop.
NOTE:
The storage server can be deployed without a monitor, keyboard, and
mouse. These ports are available and supported by the storage server,
if used.

Method 1: Remote browser (using hostname)

The storage server ships with DHCP enabled on the network port. If the
system is placed on a DHCP enabled network and the serial number of
the device is known, it can be accessed through a client running Internet
Explorer 5.5 (or later) on that network, using the 3202 port of the device.
Requirements to run the WebUI configuration application:
• Windows-based PC loaded with Internet Explorer 5.5 (or later) on
the same segment as the storage server
• DHCP-enabled network
• Serial number of the storage server

Procedure

1.
Connect the Ethernet cable to the network port of the storage server
and the corresponding network segment.
2. Go to the storage server and power it on. It will be several minutes
before the storage server is accessible on the network.
NOTE:
The storage server responds when the storage server operating
system has started.
24
System Configuration