HP StorageWorks NAS e7000 V2 Quick Start Manual page 62

Beyond Initial Setup
13. Enter the unique cluster IP address and Subnet mask, and click Next.
Figure 16: Cluster IP Address
The Cluster Service Configuration Wizard shown in
associates the cluster IP address with one of the public or mixed networks. It uses
the subnet mask to select the correct network.
14. Click Finish to complete the cluster configuration on the first node.
15. Click OK.
62
The Cluster Service Setup Wizard completes the setup process for the first
node by copying the files needed to complete the installation of Cluster
service. After the files are copied, the Cluster service registry entries are
created, the log files on the quorum resource are created, and the Cluster
service is started on the first node.
A dialog box is displayed confirming that Cluster service has started
successfully.
Figure 16 automatically
NAS e7000 v2 Quick Start Guide