Beyond Initial Setup
Configuring Cluster Disks
Note:
appear in the Managed Disks list. Therefore, if the node has multiple SCSI buses, some
disks may be listed that are not to be used as shared storage (for example, an internal
SCSI drive.) Such disks should be removed from the Managed Disks list.
1. The Add or Remove Managed Disks dialog box shown in
Figure 13: Adding or removing managed disks
2. Click Next.
58
By default, all SCSI disks not residing on the same bus as the system disk will
specifies which shared disks will be used by Cluster service. Add or remove
disks as necessary and then click Next.
Figure 13
NAS e7000 v2 Quick Start Guide