Editing; Dubbing A Tape - Sony DCR- TRV24E Operating Instructions Manual

— Editing —

Dubbing a tape

Using the A/V connecting cable
You can dub or edit on the VCR connected to
your camcorder using your camcorder as a
player. Connect your camcorder to the VCR
using the A/V connecting cable supplied with
your camcorder.
Before operation
•Set DISPLAY in
settings. (The defalt setting is LCD.)
•Press the following buttons to make the
indicator disappear so that they will not be
superimposed on the edited tape:
– DISPLAY
– DATA CODE on the Remote Commander
– SEARCH MODE on the Remote Commander
(1) Insert a blank tape (or a tape you want to
record over) into the VCR, and insert the
recorded tape into your camcorder.
(2) Prepare the VCR for recording, then set the
input selector to LINE.
Connect the A/V connecting cable to the
AUDIO/VIDEO OUT or AUDIO/VIDEO
jack.
Refer to the operating instructions of the VCR.
(3) Set the POWER switch to PLAYER*
on your camcorder.
(4) Play back the recorded tape on your
camcorder.
(5) Start recording on the VCR. Refer to the
operating instructions of your VCR.
1)
* DCR-TRV16E/TRV18E/TRV24E only
2)
* DCR-TRV25E/TRV27E/TRV116E/TRV118E
only
A/V connecting cable (supplied)/
: Signal flow/
100
to LCD in the menu
1)
/VCR*
S VIDEO
AUDIO/VIDEO
— —
(1)
(2)
2)
(3)
(4)
(5)
1)
2)
Yellow/
Red/
White/
1) 2)
IN
S VIDEO
VIDEO
VCR/
AUDIO