If You Cannot Install The Usb Driver - Sony DCR- TRV24E Operating Instructions Manual

Connecting your camcorder to
your computer using the USB
cable – For Windows users
If you cannot install the USB
driver
The USB driver has been registered incorrectly as
your computer was connected to your camcorder
before installation of the USB driver was
completed. Perform the following procedure to
correctly install the USB driver.
Viewing images recorded on a tape
Step 1: Uninstall the incorrect USB driver
1 Turn on your computer and allow Windows
to load.
2 Connect the AC power adaptor, and set the
POWER switch to PLAYER*
3 Connect the USB jack on your computer to the
(USB) jack on your camcorder using the
USB cable supplied with your camcorder.
4 Open your computer's "Device Manager".
Windows XP Home Edition/Professional:
Select "Start" t "Control Panel" t "System"
t "Hardware", and click the "Device
Manager" button.
If there is no "System" inside "Pick a
category" after clicking "Control Panel", click
"Switch to classic view" instead.
Windows 2000 Professional:
Select "My Computer" t "Control Panel" t
"System" t "Hardware" tab, and click the
"Device Manager" button.
Windows 98SE/Windows Me:
Select "My Computer" t "Control Panel" t
"System", and click "Device Manager".
1)
* DCR-TRV16E/TRV18E/TRV24E only
2)
* DCR-TRV25E/TRV27E/TRV116E/TRV118E
only
214
1) 2)
/VCR* .
1
2
1) 2)
3
4
t
1)
2)
t
t
t
t t
t
t