Audio Dubbing - Sony DCR- TRV24E Operating Instructions Manual

Audio dubbing

If you connect audio equipment, you can add
sound to your recorded tape already recorded in
the 12-bit mode by specifying the start and end
points. The original sound will not be erased.
Select one of the following connections to add
audio.
Connecting the microphone
with the MIC jack
: Signal flow/
You can check recorded picture and sound by
connecting your camcorder to a TV with the A/V
connecting cable.
Recorded sound is not output from the speaker.
Check the sound by using a TV or headphones.
MIC
(PLUG IN
POWER)
Microphone (optional)/
125