Step 2 Setting The Date And Time - Sony DCR- TRV24E Operating Instructions Manual

Step 2 Setting the
date and time
Set the date and time when you use your
camcorder for the first time. "CLOCK SET" will
be displayed each time that you set the POWER
switch to CAMERA or MEMORY (except DCR-
TRV16E/TRV116E) unless you set the date and
time.
If you do not use your camcorder for about four
months, the date and time settings may be
cleared from memory (bars may appear) because
the built-in rechargeable battery in your
camcorder will have been discharged (p. 283).
Set the year, then the month, the day, the hour
and then the minute, in that order.
(1) Set the POWER switch to CAMERA or
MEMORY (except DCR-TRV16E/TRV116E),
then press MENU to display the menu
settings.
(2) Turn the SEL/PUSH EXEC dial to select
then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select
CLOCK SET, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to adjust the
desired year, then press the dial.
(5) Set the month, day and hour by turning the
SEL/PUSH EXEC dial and pressing the dial.
(6) Set the minute by turning the SEL/PUSH
EXEC dial and pressing the dial by the time
signal. The clock starts to move.
(7) Press MENU to make the menu settings
disappear.
(1)
,
(2)
(3)
(4)
(5)
(6)
(7)
31