Recording An Image From A Tape As A Still Image - Sony DCR- TRV24E Operating Instructions Manual

Recording an image
from a tape as a still
image
– Except DCR-TRV16E/TRV116E
Your camcorder can read moving picture data
recorded on a tape and record it as a still image
on a "Memory Stick". Your camcorder can also
capture moving picture data through the input
connector and record it as a still image on a
"Memory Stick" (except DCR-TRV18E/TRV24E).
Before operation
•Insert a recorded tape into your camcorder.
•Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to PLAYER*
(2) Press N. Moving picture recorded on the
tape is played back.
(3) Keep pressing PHOTO lightly until the
picture from the tape freezes. CAPTURE
appears on the screen. Recording does not
start yet. To change from the image selected to
another image, release PHOTO once and
press it lightly again.
(4) Press PHOTO deeper. The image displayed
on the screen will be recorded on the
"Memory Stick." Recording is complete when
the bar scroll indicator disappears.
1)
* DCR-TRV18E/TRV24E only
2)
* DCR-TRV25E/TRV27E/TRV118E only
2
REW
156
1) /VCR*
PLAY FF
3
2) .
(1)
(2)
(3)
(4)
1)
2)
4
CAPTURE
1) 2)
N
1
VCR
OFF(CHG)
CAMERA
MEMORY