Myboat Control Unit - Seneca MyBoat User Manual

Hide thumbs Also See for MyBoat:
Table of Contents

Advertisement

1 - INTRODUCTION: MYBOAT CONTROL UNIT

MyBoat control unit

MyBoat control unit
Assembly detail onto DIN rail
for wall fitting. For correct
installation, follow instructions
on page 06.
Power supply for cigarette lighter plug
USER MANUAL MI004913-E
The MyBoat control unit is a product
derived from SENECA MyAlarm3. Remote
alarm, telemetry and datalogging industrial
unit.
Technical characteristics:
Display LCD 128 x 32 Dots
Rechargeable Li-Io buffer battery, up to
8 hours' autonomy
Replaceable GSM/GPRS/GPS antenna
on SMA connector
Slot for mini SIM (15 x 25 mm)
GPS internal module with built-in an-
tenna (external A-GPS antenna availa-
ble as an option)
ON/OFF key and display scroll key
Status LED: device power/status, GSM/
GPRS status
Slot for micro SD card (for any firm-
ware update and device configuration
to access the 2G network through a
SIM supplied by the best known pro-
viders)
USB micro port (reserved)
Advanced technical characteristics:
4 digital inputs to control electrical
devices
1 analogue input for supply voltage
reading
1 analogue input for fuel check
1 timed relay digital output (e.g. siren
or bilge pump)
1 non-timed relay output
05

Advertisement

Table of Contents
loading

Table of Contents