Table of Contents
Advertisement
RE 30543/12.10 VT-HACD-3-2X
Project Planning / Maintenance Instructions / Additional Information
Product documentation for VT-HACD-3-2X
Data sheet 30543
Operating instructions 30543-B
Environmental compatibility statement 30543-U
BODAC software description 30543-01-B
Start-up PROFIBUS Interface 30543-01-Z
Start-up EtherNet/IP Interface 30543-04-Z
Start-up PROFINET RT Interface 30543-05-Z
General Information on the maintenance and commissioning of hydraulic components 07800/07900
Commissioning software and documentation on the Internet: www.boschrexroth.com/HACD
Maintenance instructions:
– The devices have been tested in the plant and are supplied with default settings.
– Only complete units can be repaired. The repaired units will be supplied with default settings. User-specific settings are not
maintained. The operator will have to re-transfer the corresponding user parameters and programs.
Notes:
– Electric signals taken out via control electronics (e.g. signal "No error") may not be used for the actuation of safety-relevant
machine functions! (See also the European standard "Safety requirements for fluid power systems and their components -
Hydraulics", EN 982.)
– If electromagnetic interference must be expected, take appropriate measures to safeguard the function (depending on the
application, e.g. screening, filtration)!
– For more information refer to the BODAC software description 30543-01-B and the 30543-B operating instructions
– The upper and lower ventilation slots must not be concealed by adjacent units in order to provide for sufficient cooling.
Hydraulics Bosch Rexroth AG
15/16
Hide quick links:
Advertisement
Table of Contents
