Smartbox Grid Pad 12 Manual page 67

In Grid 3 highlight your newly named button and tap on Transmit
A. On your EasyWave socket, press the button three times.
This will return the device to operating mode. Now you can tap
Transmit A to toggle the socket to on and Transmit B to toggle it
off.
Adding the paired socket to an accessory
Once your socket has been paired, you can assign it to an
accessory and use it in the Servus Environment Control grid
sets. In Settings – Environment control, under the Accessories
heading, tap Add. From the Add accessory window select Socket
and tap Next.
You can now give the accessory a name. This is useful if you are
using more than one at the same time. In this example, the socket
is being used to control a desk fan.
69