Voice Activation And Access - Smartbox Grid Pad 12 Manual

4.5

Voice activation and access

You can use your voice to access Grid 3. This requires an
additional microphone or headset to be connected to your Grid
Pad.
Once configured, voice commands are activated by speaking the
wake-up phrase "Hey Grid 3..." followed by the text on the cell you
desire.
Configuring voice access
The settings to configure voice access are found in Settings –
Access – Voice. From this screen you can select the microphone
you wish to use by tapping the Audio input under Microphone
heading. Once you have selected your microphone it is
recommend that you use the Configure tool, followed by Improve
accuracy to read out several test sentences.
You can set the "Hey Grid 3..." wake-up phrase to anything you like
and adjust the length of time you need to issue your commands
once the wake-up phrase has been activated.
You can choose to have a sound after the wake-up phrase has
been activated, and once your selection has been made.
49