Table of Contents
Advertisement
Position the Grid Pad Camera Unit to align the screw holes align
with the holes on the underside of your Grid Pad.
Attach the Grid Pad Camera Unit with the two provided screws
and tighten with the included screwdriver, making sure they are
firmly fixed.
Plug the camera's USB connection into the USB 3.0 port on the
right side of the Grid Pad. Do not use a USB hub or an extender
cable as this may cause the camera to behave poorly.
Place the Eye Gaze stand where the Grid Pad stand used to be
and use the screws to firmly fix the stand to the Grid Pad.
Depending on the camera that is inside the camera unit, you will
need to install the appropriate software.
51
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Grid Pad 12 and is the answer not in the manual?
Questions and answers