Infrared Controls - Smartbox Grid Pad 12 Manual

Infrared controls

5.4
Setting up an infrared remote
The Servus Environment Control grid sets are ready for variety of
devices and appliances. To use them you will need to teach your
Grid Pad the correct infrared codes.
Using Infrared remote files
We keep a database of different IR remote codes for many
home entertainment devices. Before you start setting up your
devices, check the list to see if we have the relevant codes pre-
programmed to save you time. These files are stored as .remote
files. To find our current list of remotes visit:
Thinksmartbox.com/ir-remotes
Installing a remote file
To install a .remote file, download the file you need from our
website, close down Grid 3 and open your File Explorer.
Navigate to: Users\Public\Documents\Smartbox\Grid 3\
Environment Control Accessories
Copy the .remote file into this folder and open Grid 3.
In Grid 3 Go to Settings – Environment control and you will now
see the new device listed.
Setting up an infrared remote manually
64