Setting Up A Radio Device - Smartbox Grid Pad 12 Manual

Setting up a radio device

5.5
To use an EasyWave or Z-Wave radio device, you must first pair
it with your Grid Pad and then configure how it behaves. In this
example we are using an EasyWave socket, however the same
instructions apply for Z-Wave devices.
Pairing an EasyWave socket
Go to Settings – Environment control and tap on Transmitters.
Highlight EasyWave and tap Configure.
You will then need to assign a button to the socket. Select one of
the buttons from the menu and click Rename. This will be helpful if
you are going to be using more than one socket. Give the button a
recognisable name and tap enter.
Plug your EasyWave socket into a mains socket and press the
button once to enter training mode. The LED will flash in a steady
pattern.
68