Smartbox Grid Pad 12 Manual page 42

Bluetooth switches
To connect a Bluetooth switch to your Grid Pad, follow the pairing
instructions provided with your switch. Make sure you have
Bluetooth enabled on your Grid Pad. You can then configure the
switch as normal.
Switch options
Activation
When your switches are connected to your Grid Pad, you can
decide how they act within Grid 3. You can choose between
Switch Scanning, Switch elimination and Switch joystick.
Open Settings – Access – Switches and select the method you
would like to use from the drop-down box. Tap Activation to
configure your chosen method.
Switch scanning
Switch scanning highlights groups of cells in turn to locate the cell
that you want. This method sends a selection bar across your grid
in a linear fashion. You can choose to start with rows or columns.
Activate your switch to select the row or column you want, and
then scan through that row or column until you reach the desired
cell. Activating your switch again will then select that cell.
You can adjust the direction of scanning, the speed, and the way
you want to activate cells. You can also configure highlighting
options and how scanning will work with multiple switches.
44