Hauling the HVSC Downconductor
Place the HVSC downconductor cable drum close to where it is to be installed.
Figure 10.
• Make sure that the cable drum is in a servicable condition.
• Check that the correct length of HVSC downconductor has been supplied. The length of
HVSC will be marked on the drum.
• If the HVSC downconductor has been upper terminated on the outside of the drum, then
the HVSC downconductor will need to be hauled up the structure with the drum staying on
the ground.
16
Guardian Install Manual V12.indd 18
Document 36 II Guardian
Version 1.02
© Copyright 2008 LPI
22/9/08 4:25:23 PM