Table of Contents
Advertisement
Mast Couplings and Guying Points
There are two methods of coupling two sections of mast:
1. The U-Bolt set uses two stainless steel U-Bolts to clamp the two masts together. (Figure 39)
2. The inline coupling fixes the upper and lower mast sections together and provides guying
points and an exit point for the HVSC downconductor.
U-Bolts and Inline Couplings nuts must be tightened to no more than 55kg/cm (45in.lb).
Figure 39.
37
Document 36 II Guardian
Version 1.02
© Copyright 2008 LPI
Guardian Install Manual V12.indd 39
22/9/08 4:25:27 PM
Advertisement
Table of Contents
