Introduction; Intended Use; Contraindications; About The Product - Ultimate Healthcare Tamora Plus II User Manual

1. Introduction

This User Manual contains instructions for the installation, use and maintenance of the Ultimate
Healthcare Tamora Plus II dynamic mattress replacement system. You must read and fully
understand this manual before using the system.

Caution: Ultimate Healthcare shall not be liable for any damage or injury caused by
failure to follow the proper instructions as described in this User Manual.

Caution: Before using the dynamic mattress replacement system all staff must
familiarise themselves thoroughly with the various parts and controls as detailed in
this User Manual.
Note: Ultimate Healthcare reserves the right to modify the information in this User Manual at any time.
The information in this User Manual may vary slightly with respect to the basic design of the product.

2. Intended Use

The intended use of this product is to prevent and/or manage pressure ulcers while optimising patient
comfort for patients up to 200kg / 31.5 stone.
2.1

Contraindications


The mattress is not suitable for use on patients with unstable fractures.

3. About the Product

The Tamora Plus II dynamic mattress replacement system provides highly effective care and
protection for patients at High to Very High Risk of pressure ulcer development and is a cost-effective
solution for any healthcare environment.
Constructed of a single layer of alternating cells on an integral foam base the mattress is low enough
to address key height safety issues whilst offering additional protection for the patient in the event of a
power failure.
An Auto-Lockout feature prevents unintentional activation of the control panel ensuring that any
setting changes are deliberate whilst the Timed Static mode automatically returns to Dynamic mode
to safeguard patients against the risk of pressure damage.
Issue: 5 - 13/02/2019
Page 4 of 24