Project Menu Description - XIEGU G1M User Manual

Project menu description

Note: Please do not change the settings of the project menu at will, so as not to cause the rig
to work abnormally!
 Press and hold the "LK/SYS" button for 2s to enter the project menu setting interface.
 In the project menu mode, turn the encoder knob to select the option. When you want to select a certain setting function, after
the encoder is rotated to the current item, press the encoder button to enter the setting state, the leftmost button and the most
The right button is to move the current step. Turn the frequency knob to perform the selected digit increase and decrease
operation.。
01.IF OFST: IF setting;
02.LSB BFO: LSB mode BFO frequency setting;
03.USB BFO: USB mode BFO frequency setting;
04.CW BFO: CW mode BFO setting;
9