Graco Fast-Flo Instructions And Parts List page 37

237–569 Ground Wire and Clamp
7.6 m (25 ft) long.
Bleed-Type Master Air Valve (Required)
21 bar (300 psi) Maximum Working Pressure
Relieves air trapped in the air line between the pump
air inlet and this valve when closed.
107–141 3/4 npt(m x f) inlet and outlet.
107–142
1/2 npt(m x f) inlet and outlet.
106–149 Air LIne Filter
18 bar (250 psi) Maximum Working Pressure
1/2 npt(f) inlet and outlet.
214–848 Air LIne Lubricator
18 bar (250 psi) Maximum Working Pressure
1/2 npt(f) inlet and outlet.
218–316 Air Regulator Kit
Includes 1/8" size, 0–4.2 bar (0–60 psi) air regulator
and air pressure gauge, and air quick coupler. See
page 16.
Accessories
202–637 Oil Flow Regulator
14 bar (200 psi) Maximum Working Pressure
3/4 npt(m) x 1/2 npt(f).
206–994 Throat Seal Liquid (TSL)
Solvent for wet-cup. 0.24 liter (8 oz.).
204–574 Drum Cover
40 liter (10 gallon) size and 60 liter (16 gallon) size.
Drum cover mounts on top of an open drum, with
mounting holes for 1:1 metric pump. Includes thumb-
screws and a rubber gasket.
200–326 Drum Cover
200 liter (55 gallon) size. Drum cover mounts on top of
an open drum, with mounting for 1:1 metric pump.
101–078 Y Line Strainer
35 bar (500 psi) Maximum Working Pressure
3/4 npt(f) ports; no. 20 mesh screen.
206–265 Spout
For directing fluid into pails.
Carbon steel; 3/4 npt inlet.
215–965 Intake Extension Tube
Intake tube 265 mm (10.4 in.) long; screws into bottom
1–1/2 npt(f) thread of 1:1 metric pump.
Carbon steel. See manual 307–459.
214–029 Hose and Valve
12 bar (175 psi) Maximum Working Pressure
7.6 m (25 ft) long, 1/2 npt(m) x 3/4 npt(m), electrically
conductive.