System Settings (General) On The Operation Panel; Accessing The System Settings (General) - Sharp MX-C400P Operation Manual

SYSTEM SETTINGS (GENERAL) ON
THE OPERATION PANEL
This section explains system settings that can be configured on the operation panel by general users.

Accessing the System Settings (General)

BACK
PRINT
JOB
STATUS
SYSTEM
SETTINGS
LOGOUT
BACK
• To quit the system settings, select the [Exit] key in the top right corner of the screen.
• For the procedure to follow when user authentication is enabled, see
"1. BEFORE USING THE MACHINE".
OK READY
DATA
USB-Device Check
OK
Make sure that the machine is in the standby state and
then press the [SYSTEM SETTINGS] key on the
operation panel.
When the [SYSTEM SETTINGS] key is pressed, the
following menu screen appears on the display.
Use the arrow keys to select the desired item, press the
[OK] key, and configure the settings.
For detailed explanations of each of the settings, see the
following pages of this chapter.
"USER AUTHENTICATION" (page 1-15) in
3-7
SYSTEM SETTINGS
OPERATION PANEL (GENERAL)