Problems Related To Print Results - Sharp MX-C400P Operation Manual

Problem
Direct printing of a file
in a shared folder on a
computer is not
possible.
A tray, finisher, or
other peripheral
device installed on the
machine cannot be
used.

PROBLEMS RELATED TO PRINT RESULTS

Problem
The image is grainy.
The image is too light
or too dark.
Point to check
Is "IPsec Settings" enabled on the
machine?
Have the peripheral devices that are
installed on the machine been
configured in the printer driver?
Point to check
Are the printer driver settings
appropriate for the print job?
Have you selected color settings
appropriate for the print job?
Does the image (particularly a photo)
need correction?
(Windows)
When "IPsec Settings" is enabled in the system settings
(administrator), direct printing of a file in a shared folder
may not be possible in some computer environments.
For information about "IPsec settings", consult your
administrator.
➞ System Settings (Administrator) > "Security Settings"
> "IPsec Settings"
Open the printer properties and click the [Auto
Configuration] button on the [Configuration] tab.
(Windows)
If auto configuration cannot be executed, see the
Software Setup Guide.
When selecting print settings, you can set the print
mode to [Normal], [High Quality], or [Fine]. When you
need a very clear image, select [Fine]. (The [Fine] mode
cannot be selected when using the PCL5c printer
driver.)
Windows:
The resolution setting is selected in the [Advanced]
tab of the printer driver properties window.
Macintosh:
Select the resolution in the [Advanced] menu of the
print window. (In Mac OS v10.5 and 10.6, select the
resolution on the [Color] menu in the print window.)
Select color settings appropriate for the print job.
Windows:
Select the appropriate document type in [Image Type]
on the [Color] tab of the printer driver. Advanced color
settings can be selected in the [Advanced Color]*
button.
Macintosh:
Select the appropriate document type in [Image Type]
on the [Color] menu of the printer driver. Advanced
color settings can be selected in the [Advanced
Color]* button. (In Mac OS X v10.5 to 10.5.8 and 10.6,
in the [Advanced Color] tab.)
* When adjusting detailed color management settings
such as "Output Profile", select "Custom" from "Image
Type" and then select the desired setting from
"Advanced Color".
Brightness and contrast can be corrected by performing
[Color Adjustment] on the [Color] tab of the printer
driver. These settings can be used for simple
corrections when you do not have image editing
software installed on your computer.
4-11
TROUBLESHOOTING
Solution
Solution