Removing Staple Jams; Finisher - Sharp MX-C400P Operation Manual

REMOVING STAPLE JAMS

Follow the steps below to remove a staple jam.

FINISHER

Caution
Take care that a bent staple does not hurt you.
1
2
3
4
Open the cover.
While pressing the lever over to the left,
slide the finisher to the left until it stops.
Gently slide the finisher until it stops.
Lower the staple case release lever and
remove the staple case.
Pull the staple case out to the right.
Raise the lever at the front end of the
staple case and remove the jammed
staple.
Remove the leading staple if it is bent. If bent staples remain, a
staple jam will occur again.
4-6
TROUBLESHOOTING