How To Remove Misfeeds - Sharp MX-C400P Operation Manual

HOW TO REMOVE MISFEEDS

If you require more information when reading the instructions in the display, see the paper misfeed illustrations below.
Refer to the illustration below and then go to the appropriate illustration (1 to 9) for your situation.
☞
(1)-(3): page 4-3, (4)-(8): page 4-4, (9): page 4-5
When removing a misfeed or closing a cover, tray, or the finisher, take care that your fingers do not become pinched.
(1) Paper misfeed in the output area
(2) Paper misfeed in the fusing unit
(1) (2)
(4) (8)
Remove the misfed paper.
If a paper misfeed has
occurred inside the fusing
unit, press down on the
green part, open the fusing
unit, and remove the paper.
(9)
(3)
(5)
(6), (7)
Caution
• The fusing unit area is hot. Take care
not to burn yourself. (Do not touch any
metal parts.)
• When the fusing unit is tilted down
toward you, projections come out in the
middle. Do not touch the projections.
These can be a cause of human injury
or machine failure.
Unfused toner may remain on the paper that is
removed. Take care that it does not soil your hands or
clothing.
(3) Paper misfeed in the transport area
4-3
TROUBLESHOOTING
When the rotate knob is
turned in the direction of the
arrow, paper comes out for
above.