Adjustment - Triumph Daytrona 675 Manual

Maintenance and Adjustment

Adjustment

1. Opening cable adjuster
2. Closing cable adjuster
3. Closing cable – free play
measurement point
4. Throttle grip (Daytona 675 shown)
5. Opening cable – free play
measurement point
82
Remove the seat.
Disconnect the battery, negative (black) lead
first.
Remove the fuel tank.
Remove the airbox.
Release the locknuts on the 'opening' cable
adjusters.
Rotate the 'opening' cable adjuster at the
throttle grip end such that it has an equal
amount of adjustment in each direction.
Rotate the 'opening' cable adjuster at the
throttle body end of the cable to give
0.08 - 0. 1 2 in (2 - 3 mm) of play at the
throttle grip. Tighten the locknut.
Make any minor adjustments as necessary to
give 0.08 - 0. 1 2 in (2 - 3 mm) of play using
the adjuster near the throttle grip end of the
cable. Tighten the adjuster locknut.
With the throttle fully closed, ensure that
there is 0.08 - 0. 1 2 in (2 - 3 mm) of free play
in the 'closing' cable at the throttle cam
attached to the throttle bodies. If necessary,
adjust at the throttle body end in the same
way as the 'opening'
0.08 - 0. 1 2 in (2 - 3 mm) of play is present.
Tighten the adjuster locknuts.
cable, until