Coolant Level Adjustment - Triumph Daytrona 675 Manual

Street Triple and Street Triple R
1. Expansion tank
2. Tank cap
3. MAX mark
4. MIN mark
Position the motorcycle on level ground and
in an upright position.
Remove the seat. The expansion tank is
positioned between the frame rails beneath
the seat.
Check the coolant level in the expansion
tank. The coolant level must be between the
MAX and MIN marks. If the coolant is below
the minimum level, the coolant level must be
adjusted.
Maintenance and Adjustment

Coolant Level Adjustment

Do not remove the expansion tank or
radiator pressure cap when the engine is
hot. When the engine is hot, the coolant
inside the radiator will be hot and also
under pressure. Contact with this hot,
pressurized coolant will cause scalds and
skin damage.
Allow the engine to cool.
Daytona 675 and 675 R
The expansion tank cap can be removed
from the left hand of the motorcycle,
between the rear of the lower fairing and the
frame.
Street Triple and Street Triple R
Remove the seat to gain access to the
expansion tank.
All Models
Remove the cap from the expansion tank
and add coolant mixture through the filler
opening until the level reaches the MAX
mark. Install the cap.
Warning
79