Unpainted Aluminum Items; Cleaning Of The Exhaust System; Washing; Drying - Triumph Daytrona 675 Manual

Maintenance and Adjustment

Unpainted Aluminum Items

Items such as brake and clutch levers, wheels,
engine covers, top and bottom yokes on
some models must be correctly cleaned to
preserve their appearance. Please contact
your dealer if you are unsure which
components on
unpainted aluminum parts.
Use a proprietary brand of aluminum cleaner
which does not contain abrasive or caustic
elements.
Clean aluminum items regularly, in particular
after use in inclement weather, where the
components must be hand washed and dried
each time the machine is used.
Warranty claims
maintenance will not be allowed.

Cleaning of the Exhaust System

All parts of the exhaust system of your
motorcycle must be cleaned regularly to
avoid a deterioration of its appearance.
Note:
• The exhaust system must be cool
before washing to prevent water
spotting.
122
your motorcycle
due to inadequate

Washing

Prepare a mixture of cold water and mild
automotive cleaner. Do not use a highly
alkaline soap
commercial car washes because it leaves a
residue.
are
Wash the exhaust system with a soft cloth. Do
not use an abrasive scouring pad or steel
wool. They will damage the finish.
Rinse the exhaust system thoroughly.
Ensure no soap or water enters the mufflers.

Drying

Dry the exhaust system as far as possible with
a soft cloth. Do not run the engine to dry the
system or spotting will occur.

Protecting

When the exhaust system is dry, rub
'Motorex 645 Clean and Protect' into the
surface.
The use of products containing silicone will
cause discoloration of the chrome and
must not be used. Similarly, the use of
abrasive cleaners and polishes will damage
the system and must not be used.
It is recommended that regular protection be
applied to the system as this will both protect
and enhance the system's appearance.
as commonly found
Caution
at