Brake/Tail Light; Brake/Tail Light Replacement - All Models; Turn Signal Lights; Bulb Replacement - Triumph Daytrona 675 Manual

To remove the position lamp bulb:
Without pulling the wires, ease the bulb
holder from its socket. The bulb is removed
from its holder by pulling gently upwards.
Installation for both bulbs is the reverse of the
removal procedure.
Tighten the headlamp fasteners to 3 Nm.
When reconnecting the battery, connect
the positive (red) lead first.
Caution
Maintenance and Adjustment

Brake/Tail Light

Brake/Tail Light Replacement - All
Models
The brake/tail light unit is a sealed,
maintenance free LED unit.

Turn Signal Lights

Bulb Replacement

1. Turn signal lens
2. Securing screw
The lens on each turn signal light is held in
place by a securing screw located in the lens
of the light.
Loosen the screw and remove the lens to
gain access to the bulb for replacement.
119