Setting The Maintenance Specifications - Lochinvar EcoForce EF80 Installation, Commissioning, User And Maintenance Instructions

S T M
ETTING HE AINTENANCE
The water heater can be programmed in such a way that an automatic maintenance message is displayed, there are three options that can
be selected, you can either select a single option or all three can be activated:
1. A programmed date is reached
2. A number of burning hours are reached
3. A number of ignition cycles are reached
Operating screen:
W A T R H T R
> > > : 1 2 3
Press [MENU]
Select "Maintenan" using [◄] & [►] and press [ENTER]
Operating screen:
M a i n
Operating screen:
M a i n
Go to next page
12.15.1 Maintenance settings
S
PECIFICATIONS
: S T A N D - B Y
. 4 ° C ( 1 2 3
t e n R e s e
Press [▲] to reset the:
Counter for the total amount of burning hours.
Counter for the total amount of ignition cycles.
(The text will blink once briefly after resetting).
t e n M o d e
Blinking second line.
What is blinking at the second line (before a selection is made) is the active maintenance
option.
Press [▲] or [▼] to change the selected
blinking option.
Screen: Selecting of all maintenance options.
M a i n t e n
A l l
Press [►] to set:
The option that is blinking can be changed using by [▲] & [▼]
* Date for the Maintenance message.
* Total amount of burning hours for the Maintenance message.
* Total amount of ignition cycles for the Maintenance message.
After selecting one of these values the water heater returns to the
maintenance operating screen.
Press [ENTER] to confirm the changes.
. 4 ° C )
t
M o d e
Confirmation screen:
A r e y o u
< C a n c e l ;
Press [◄] to cancel the changes or [►] to confirm the changes.
Hereafter the water heater returns to the operating screen.
s u r e
> C o n f i r m
63