Safety Guidelines; General Description Of Safety Symbols Used - Lochinvar EcoForce EF80 Installation, Commissioning, User And Maintenance Instructions

SAFETY GUIDELINES

Keep these instructions near the Water heater for quick reference.
This equipment must be installed by a competent person, registered with a H.S.E. approved body. All installations must conform to the
relevant Gas Safety and Building Regulations. Health & Safety requirements must also be taken into account when installing any
equipment. Failure to comply with the above may lead to prosecution
Without written approval of the manufacturer the internals of the Water heater may not be changed. When changes are executed without
approval, the Water heater certification becomes invalid.
Commissioning, maintenance and repair must be done by a skilled installer/engineer, according to all applicable standards and regulations.
G D
ENERAL ESCRIPTION
BANNED
A black symbol inside a red circle with a red diagonal indicates an action that should not be performed
WARNING
A black symbol added to a yellow triangle with black edges indicates danger
ACTION REQUIRED
A white symbol inserted in a blue circle indicates an action that must be taken to avoid risk
ELECTRICAL HAZARD
Observe all signs placed next to the pictogram. The symbol indicates components of the unit and actions described
in this manual that could create an electrical hazard.
HOT SURFACES
The symbol indicates those components with a high surface temperature that could create a risk.
This symbol shows essential information which is not safety related
Recover or recycle material
O S S U
F AFETY YMBOLS SED
6