Ac Power; Installing A Plug On The Mains Lead - Martin T-Rex User Manual

AC
POWER
The T-Rex's operating voltage is printed on the serial number label near the AC
input. Verify that the operating voltage closely matches the AC supply voltage
before applying power. Contact your Martin dealer if the voltage on the label
differs from the AC mains voltage by more than five percent.
I N S T A L L I N G A P L U G O N T H E M A I N S
L E A D
The fixture's mains lead may require a grounding-type cord cap that fits your
power distribution cable or outlet. Consult a qualified electrician if you have any
doubts about proper installation.
Warning! For protection from dangerous electric shock, the fixture must
be grounded (earthed). The AC mains supply shall have
overload and ground-fault protection.
Important! Verify that the feed cables are undamaged and rated for the
current requirements of all connected devices before use.
Following the cord cap manufacturer's instructions, connect the yellow and green
wire to ground (earth), the brown wire to live, and the blue wire to neutral. The
table below shows some pin identification schemes.
yellow/green
6
Wire
brown
blue neutral
ground
T-Rex user manual
Pin Marking
live
Screw color
"L" yellow or brass
"N" silver
green
www.audiovias.com
2