Table of Contents
Advertisement
Quick Links
Model 2099-10
Instruction Manual
10MHz Reference
April 2019, Rev. E
MODEL 2099
FREQUENCY SOURCE
C
T
ROSS
ECHNOLOGIES INC.
POWER OVEN
Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc.,
but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc.
for purposes of operating the equipment.
When ordering parts from Cross Technologies, Inc., be sure to include the equipment
model number, equipment serial number, and a description of the part.
C
T
ROSS
ECHNOLOGIES, INC.
6170 Shiloh Road
Alpharetta, Georgia 30005
(770) 886-8005
FAX (770) 886-7964
Toll Free 888-900-5588
WEB www.crosstechnologies.com
E-MAIL info@crosstechnologies.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Cross Technologies 2099-10
Summary of Contents for Cross Technologies 2099-10
- Page 1 POWER OVEN Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc. for purposes of operating the equipment. When ordering parts from Cross Technologies, Inc., be sure to include the equipment model number, equipment serial number, and a description of the part.
-
Page 2: Table Of Contents
All Cross Technologies, Inc. products are warranted against defective materials and workmanship for a period of one year after shipment to customer. Cross Technologies, Inc.’s obligation under this warranty is limited to repairing or, at Cross Technologies, Inc.’s option, replacing parts, subassemblies, or entire assemblies. -
Page 3: General
Front panel LEDs provide indication of DC power and oven warm-up. The level is +7 dBm and the 2099-10 works into either a 75 or 50 ohm load (Option D). Connectors are BNC female. A relay contact closure or open indicates when the oscillator oven is stabilized. Powered by a 100-240 (±10%) VAC power supply;... -
Page 4: Technical Characteristics
1.2 Technical Characteristics TABLE 1.0 2099-10, 10MHz Reference Specifications* Output Characteristics Number of Outputs Impedance 75Ω Return Loss > 18 dB Frequency 10.0000 MHz Output Level +7 dBm ± 3 dBm Harmonics < -30 dBC, < -40 dBC typ. Spurious <... -
Page 5: Mechanical
2.0 Installation 2.1 Mechanical - The 2099-10 consists of one RF PCB housed in a 1 RU (1 3/4 inch high) by 14 inch deep chassis. A switching, ± 12, +24, +5 VDC power supply provides power for the assemblies. The 2099-10 can be secured to a rack using the 4 holes on the front panel. -
Page 6: Rear Panel Outputs
Lights GREEN when DC voltage is Lights YELLOW while oven warms up. present from AC power supply. MODEL 2099 FREQUENCY SOURCE ROSS ECHNOLOGIES INC. POWER OVEN FIGURE 2.2 2099-10 Front Panel Controls and Indicators 2099-10 Manual, Rev. E Page 6 04/02/19... -
Page 7: Operation
2.4 Installation / Operation 2.4.1 Installing and Operating the 2099-10, 10MHz Reference 1.) Connect REFERENCE OUTPUTS, J1 and/or J2, to the external equipment (Figure 2.1). 2.) Connect 100- 240 (±10%) VAC, 47 - 63 Hz to AC connector on the back panel. -
Page 8: Environmental Use Information
G. Top Cover - There are no serviceable parts inside the product so, the Top Cover should not be removed. If the Top Cover is removed the ground strap and associated screw MUST BE REINSTALLED prior to Top Cover screw replacement. FAILURE TO DO this may cause INGRESS and/or EGRESS emission problems. 2099-10 Manual, Rev. E Page 8 04/02/19... -
Page 9: Shiloh Road Alpharetta, Georgia
ROSS ECHNOLOGIES, INC. 6170 Shiloh Road Alpharetta, Georgia 30005 (770) 886-8005 FAX (770) 886-7964 Toll Free 888-900-5588 WEB www.crosstechnologies.com E-MAIL info@crosstechnologies.com Printed in USA 2099-10 Manual, Rev. E Page 9 04/02/19...
Need help?
Do you have a question about the 2099-10 and is the answer not in the manual?
Questions and answers