Table of Contents
Advertisement
Quick Links
Instruction Manual
2009 TEST DOWNCONVERTER
C
T
ROSS
ECHNOLOGIES, INC.
DC ALARM
Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc.,
but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc.
for purposes of operating the equipment. Printed in USA.
When ordering parts from Cross Technologies, Inc., be sure to include the equipment
model number, equipment serial number, and a description of the part.
Model 2009-2425-1750
C
T
ROSS
ECHNOLOGIES, INC.
6170 Shiloh Road
Alpharetta, Georgia 30005
(770) 886-8005
FAX (770) 886-7964
Toll Free 888-900-5588
WEB: www.crosstechnologies.com
E-MAIL: info@crosstechnologies.com
Downconverter
C
T
ROSS
ECHNOLOGIES, INC.
RF IN
DC POWER
•
J3
J1
September 2019, Rev. 0
IF OUT
•
J2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Cross Technologies 2009-2425-1750
Summary of Contents for Cross Technologies 2009-2425-1750
- Page 1 DC ALARM Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc. for purposes of operating the equipment. Printed in USA. When ordering parts from Cross Technologies, Inc., be sure to include the equipment model number, equipment serial number, and a description of the part.
- Page 2 WARRANTY - The following warranty applies to all Cross Technologies, Inc. products. All Cross Technologies, Inc. products are warranted against defective materials and workmanship for a period of one year after shipment to customer. Cross Technologies, Inc.’s obligation under this warranty is limited to repairing or, at Cross Technologies, Inc.’s option, replacing parts, subassemblies, or entire assemblies.
- Page 3 1.0 General 1.1 Equipment Description The 2009-2425-1750 Downconverter converts a 2.40 - 2.50 GHz signal to 1700 - 1800 MHz with a low side local oscillator (LO) (non-inverted spectrum). Featuring low phase noise and high stability, this unit down converts 2.40 - 2.50 GHz signals to 1700 - 1800 MHz. The 2.40 - 2.50 GHz input is mixed with a synthesized local oscillator (LO) signal to 1700 - 1800 MHz.
- Page 4 100-240 ±10% VAC Wall Power Supply, +15 VDC 1RU Rack Mounting. Power Supply not included. Requires Cross 2000-01 Power Supply. *+10˚C to +40˚C; 2000 meters max elevation; 80% max humidity; Specifications subject to change without notice. 2009-2425-1750 Manual, Rev. 0 Page 4 09/05/19...
- Page 5 DC ALARM DS1 - DC POWER LED DS2 - ALARM LED Lights green when DC Lights red when PLL power is present. comes out of lock. FIGURE 2.2 Model 2009-2425-1750 Front Panel Indicators 2009-2425-1750 Manual, Rev. 0 Page 5 09/05/19...
- Page 6 2.5 Installation / Operation 2.5.1 Installing and Operating the 2009-2425-1750: 1. For -P4 models, connect one end of the Wall Power Supply to the 2009-2425-1750 DC Power In, J3, and the other end to 115 VAC, 60 Hz (Figure 2.3).
- Page 7 G. Top Cover - There are no serviceable parts inside the product so, the Top Cover should not be removed. If the Top Cover is removed the ground strap and associated screw MUST BE REINSTALLED prior to Top Cover screw replacement. FAILURE TO DO this may cause INGRESS and/or EGRESS emission problems. 2009-2425-1750 Manual, Rev. 0 Page 7 09/05/19...
- Page 8 ROSS ECHNOLOGIES, INC. 6170 Shiloh Road Alpharetta, Georgia 30005 (770) 886-8005 FAX (770) 886-7964 Toll Free 888-900-5588 WEB: www.crosstechnologies.com E-MAIL: info@crosstechnologies.com Printed in USA 2009-2425-1750 Manual, Rev. 0 Page 8 09/05/19...
Need help?
Do you have a question about the 2009-2425-1750 and is the answer not in the manual?
Questions and answers