Contents Of Package - Rikon Power Tools 10-341 Operator's Manual

Model 10-341 18" Bandsaw is shipped complete in one crate.
Unpacking and Checking Contents
a. Separate all "loose parts" from packaging materials and check each item with the Loose Parts
lists to make sure all items are accounted for, before discarding any packaging material.
b. Install the hoist ring into threaded hole on top of Bandsaw frame (if not pre-installed). This
allows the user to connect a properly secured hoist mechanism to lift the Bandsaw.
c. With the help of another person, or with the hoist ring, unbolt the Bandsaw from the packing
pallet. Carefully lift the Bandsaw off the packing pallet and place it on a level floor.
d. Remove the protective oil that is applied to the table. Use any ordinary house hold type grease
or spot remover. Refrain from using any cleaning solutions with water as an ingredient.
e. Apply a coat of paste wax to the table to prevent rust. Wipe all parts thoroughly with a clean
dry cloth.
A

CONTENTS OF PACKAGE

TABLE OF LOOSE PARTS
Item
A Bandsaw Frame Assembly
B Table with Insert & Fence Rail Support
C Owner's Manual
D Parts Package 1
E Parts Package 2
B
C
8
Part Name
D
E