Transferring Calls; Ending Calls; Conference Calls - Yealink SIP-T42S User Manual

HV.Select Yealink T42S Phone User Guide

Transferring Calls

You can transfer a call to another party in one of the three ways:

Blind Transfer: Transfer a call directly to another party without consulting.

Semi-Attended Transfer: Transfer a call when the target phone is ringing.

Attended Transfer: Transfer a call with prior consulting.
To perform a blind transfer:
1. Press the Tran soft key during a call.
2. Enter the number you want to transfer the call to.
3. Press the Tran soft key to complete the transfer.
4. Then the call is connected to the number to which you are transferring.
To perform a semi-attended transfer:
1. Press the Tran soft key during a call.
2. Do one of the following:

Enter the number you want to transfer the call to.

Press the Directory soft key to find the number of directory or History.
3. Press or
4. Press the Tran soft key to complete the transfer when receiving ringback.
To perform an attended transfer:
1. Press the Tran soft key during a call.
2. Do one of the following:

Enter the number you want to transfer the call to.

Press the Directory soft key to find the number of directory or History.
3. Press or
4. After the party answers the call, press the Tran soft key to complete the transfer.
If you are using a handset, the transfer can be completed by hanging up the handset. You
can cancel the transfer before the call is connected by pressing the Cancel soft key.

Ending Calls

1. If you are using the handset, press the Cancel soft key or hang up the handset.
2. If you are using the headset, press the Cancel soft key.
3. If you are using the speakerphone, press

Conference Calls

1. When the first party answers the call, press the Conf soft key to place a new call.
2. The active call is placed on hold.
3. Enter the number of the second party and press
4. When the second party answers the call, press the Conf soft key again to join all parties in the
conference.
During the conference call, you can do the following:

Press the Hold soft key to place the conference on hold.

Press the Split soft key to split the conference call into two individual calls.

Press the New Call soft key to place a new call.

Press the Back soft key to return to the previous interface.

Press
to dial out.
to dial out.
to mute the conference call.
or the Cancel soft key.
, , or the Send soft key.