Dalsa Falcon2 Series User Manual page 91

Figure 34 File Access Control Category in CamExpert
Name FileSelector
Display Name File Selector
Name Space SFNC
Firmware Release 00
Visibility Beginner
Access Read-Write
Type Enumeration
Values Firmware: [Write-Only] Writing a new firmware here will update the camera.
UserFlatfieldCoefficients1: Previously saved flat field coefficients (i.e. gain and offset).
UserFlatfieldCoefficients2: Previously saved flat field coefficients (i.e. gain and offset).
UserFlatfieldCoefficients3: Previously saved flat field coefficients (i.e. gain and offset).
UserFlatfieldCoefficients4: Previously saved flat field coefficients (i.e. gain and offset).
Logs: [Read-Only] Download camera logs. This is a zipped file.
CameraSettings: [Read-Only] Download camera settings. This is a html file. Please save
with a htm extension.
TestFile: Dummy read and write file.
Notes Selects the file to access. The file types which are accessible are device dependent.
Name FileOperationSelector
Display Name File Operation Selector
Name Space SFNC
Firmware Release 00
Visibility Beginner
Access Read-Write
Type Enumeration
Values Open: Select the Open operation - executed by FileOperationExecute.
Close: Select the Close operation - executed by FileOperationExecute.
Read: Select the Read operation - executed by FileOperationExecute.
Write: Select the Write operation - executed by FileOperationExecute
Delete: Select the Delete operation - executed by FileOperationExecute
Notes Selects the target operation for the selected file in the device. This operation is executed
when the File Operation Execute feature is called.
Camera Operation • 91